A free copy of this comprehensive installation and user guide is supplied with every system.

Gearbox only. For use in Daltec 63 Drive Units. Suitable for HDD-6A19A and HDD-6C19A Motors.

Cable for Daltec 63 systems with 52mm disc

Cable for Daltec 63 systems with 55mm disc

Flexible Link and Fixed Bush type Connectors for Daltec 63 systems.

Stainless Steel Hopper with Straight Through Tube for Daltec 63 systems

Plastic Corner Housing/Wheel for Daltec 63 systems

Tube and Connectors for Daltec 63 systems

Feeders for Daltec 63 systems. For use with 75mm Outlet.

Adaptor for dispensers for 50mm tube. Suitable for Daltec 63 systems.

The pipe joint is used as a connection between 75mm Drop Tube MQ4-C6330 and 76mm steel tube 301255. Suitable for Daltec 63 systems.

Feed drop suitable for Daltec 63 systems. Hygienic and easy to use. Easy assembly without screws.

Clear Drop Tube with  outside diameter 63mm for Daltec 63 systems.

This versatile sealant is ideal for sealing up sections of conveyors which need to be waterproofed.

Suitable for all Rotaflex & Daltec systems.

NB The white coloured unit CRA-2UPUG can be used as a replacement for the clear moulded plastic unit CRA-2UPUE which is currently out of stock.

This adaptor is required to mate an upper pickup unit and cut off slide to the R100/127 lower pickup units.

Plate for new style adaptor. The plate is attached to part CRA-4X500 (Type 4 to Type 5 - 0° Adaptor) to complete the adaptor as shown in the photograph. The adaptor can be connected to parts CRA-2UPUE and CRA-2UPUF (Upper Pickup Unit). 

Original adaptor kit. 275mm Flange connects to 400mm Cone Plate kit complete with cut-off slide.

Suitable  for all Rotaflex and Daltec systems.

This electronic sensor is housed in a cylindrical body 32mm diameter x 130mm long; one end of the sensor is sensitive to the presence of material; the cable, adjustment screw and LED status indicators are at the opposite end. This sensor also has an integrated electronic timer with a time delay which can be adjusted between zero and ten minutes.

Compact electronic control units for semi automatic operation of one feeding system.

Danfoss Relay for Daltec systems.

Daltec Sensors and Danfoss Thermal Overloads and Contactors for all Daltec systems. 

Galvanised mild steel equal angle is available in 3 metre cut lengths; suitable for all types of conveyor and silo supports.

Light duty support brackets are suitable for intermediate support. They can either be fixed solidly, or to prevent the chain slipping when on an inclined section.

Suitable for Rotaflex R55 and Daltec 50/63 systems.

Wall brackets and Tube Clamps suitable for all Daltec systems.

Galvanised support chain with links 19mm long x 2.5mm diameter; available in coils of 10, 60 and 120 metres.

Zinc plated S hooks are a used in all chain suspension systems; they are a prerequisite for this type of installation for securing chain to chain or brackets etc.

Zinc plated ceiling screw hook for fixing chain supports directly into woodwork or masonry.

Suitable for Rotaflex and Daltec systems.

Including Driving Ring, Driving Wheel, Tension Wheel for Daltec 63 systems.

180° Return Wheel

Replacement parts for the top section of the Daltec 63 Volumetric Dispenser.

Replacement parts for the middle outlet section of the Daltec 63 Volumetric Dispenser.

Replacement parts for the bottom funnel section of the Daltec 63 Volumetric Dispenser.