A free copy of this comprehensive installation and user guide is supplied with every system.

Suits Rotaflex Final Outlet Units / Final Transfer Units prefixed 22/116.

Suits Rotaflex Final Outlet Units / Final Transfer Units prefixed 22/116.

Suits Rotaflex Final Outlet Units / Final Transfer Units prefixed 22/116.

These will accept any motorgear units prefixed HRG; these have a 22mm drive shaft and 116mm square mounting flange c/w mounting holes at 128mm PCD.

Can be wall or ceiling mounted.

Final and Intermediate Transfer Units will accept any Motorgear units prefixed HRG and has a 22mm drive shaft and 116mm square mounting flange complete with mounting holes at 128mm PCD.

Suitable for all Rotaflex & Daltec systems.

The Lower Pickup Unit is the final interface between the silo and conveyor. There are single and double formats and couple directly onto the cut off slide.

For optional use with the Lower Pickup Unit.

Top quality flexible spiral manufactured from high carbon spring steel.

Corevex™ uPVC Bends and Tubes are the most commonly specified bends and tubing for Rotaflex systems, though Stainless Steel and Galvanised Steel Bends and Tubes are available as an option.

There are three different methods securing and coupling Corevex™ uPVC and Steel Bend and Tubes.

Type 101, Type 150 and Type 200M Outlets are available for Rotaflex R75 and R90 systems.  All the outlets accept 73 o/d x 70 i/d extension drop tubing - MQ4-W7330.

Note: - All material outlets from conveyors must be fitted with an outlet drop; these protect personnel from hazardous moving machinery.

Suitable for R55, R75 and R90 systems.

NB MQ4-W7330 and MQ5-W7730 are only compatible with the old style R90 type 100 outlets.

Light duty support brackets are suitable for intermediate support on Rotaflex systems.

Can be used to mount Tubes from 29mm to 140mm diameter using the appropriate Tube Clamp.

Can be used to attach R90 Tube to 300mm or 500mm Right Angle Wall Brackets

Galvanised support chain with links 19mm long x 2.5mm diameter; available in coils of 10, 60 and 120 metres.

Zinc plated S hooks are a used in all chain suspension systems; they are a prerequisite for this type of installation for securing chain to chain or brackets etc.

Zinc plated ceiling screw hook for fixing chain supports directly into woodwork or masonry.

Suitable for Rotaflex and Daltec systems.

Galvanised mild steel equal angle is available in 3 metre cut lengths; suitable for all types of conveyor and silo supports.

This wall entry gasket allows you to easily make a neat and weather proof finish where your conveyor passes through walls.

This versatile sealant is ideal for sealing up sections of conveyors which need to be waterproofed.

This control panel is for one conveyor; it is configurable in either semi-automatic mode or automatic mode if used in conjunction with an E1P-57107 final sensor with the integral timer; this provides automatic stop and auto re-start delays of up to 10 minutes.

This panel is specifically for operation in automatic mode only; it has an integrated electronic timer E1T-D7XX5; this has seven user selectable time ranges, three of which are appropriate for this application; 6-60 minutes, 1-10 hours and 10-100 hours.

These panels are for conveyor systems which operate in any type of networked system; the panel has two modes; semi-automatic and automatic. The type of panel required is always specified by the total number of motor gear units which are in the system. These panels are for two drives.

Suitable  for all Rotaflex and Daltec systems.

This electronic sensor is housed in a cylindrical body 32mm diameter x 130mm long; one end of the sensor is sensitive to the presence of material; the cable, adjustment screw and LED status indicators are at the opposite end. This sensor also has an integrated electronic timer with a time delay which can be adjusted between zero and ten minutes.